The Eco-Aqua 30W LED Spotlight is a new high performance LED light source that replicates the lit effect of metal halide lamps
with a closely packed cluster of high-power LEDs and a range of interchangeable lenses.

• The spotlight uses a die cast aluminium housing with a unique finned design to eliminate the need for cooling fans and
  can be clamped to the side of the aquarium, or suspended over the tank with an optional suspension kit.

the Eco-Aqua spotlight can be used for terrariums and both marine and freshwater aquariums and is suitable for use as the primary light source. (...)

The Lucky Reptile Thermo Socket Expert is an pivoting recessed lamp with E27 socket for PAR lamps like Lucky Reptile Bright Sun and Halogen Sun.

• It is specially designed for installation in the terrarium lid and ideal in conjunction with the Lucky Reptile Furni-Top as well as all vivariums with inserted ceiling and display units.
• The pivoting angle is 12°.

Ceramic fixture with cable and switch for terrarium installations

• for use with lamps and radiators that heat up strongly
• suitable up to 300 W

With holder bracket for fixtures (can easily be removed if not desired)

• Easy lamp access
• With eyes for ceiling installation
• Diameter 12 cm, height 22 cm

The Exo Terra Halogen Glow Light gives you the versatility of placing heat and/or light sources on your terrarium where needed.

• Day-light and night glow fixture in one
• Provides long-lasting luminous, reflective glow
• Heat-resistant, type GU-10 porcelain light socket (...)

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.

• To attach a power cord to the lampholder you have to unscrew the base.
• For doing so you have to push down the retention pin inside the lampholder (e.g with a screwdriver) and unscrew the upper ring.

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.

• To attach a power cord to the lampholder you have to unscrew the base.
• For doing so you have to push down the retention pin inside the lampholder (e.g with a screwdriver) and unscrew the upper ring.

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.

• To attach a power cord to the lampholder you have to unscrew the base.
• For doing so you have to push down the retention pin inside the lampholder (e.g with a screwdriver) and unscrew the upper ring.

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.

• To attach a power cord to the lampholder you have to unscrew the base.
• For doing so you have to push down the retention pin inside the lampholder (e.g with a screwdriver) and unscrew the upper ring.

The Repti Clamp Lamp is a complete lamp with porcelain E27 socket and 2 meter power cord (Euro plug) and immediately ready for use.

• The wire mesh makes it difficult for the animals to get in contact with the bulb and ensures proper ventilation, preventing the lamp from overheating.
• Thanks to the clamp the lamp can be easily attached to the aquarium/terrarium frame. (...)

Instead of a wire mesh the Repti Clamp Lamp Deluxe has an aluminum reflector to enhance the light output of bulbs. T

• hanks to the reflector the Clamp Lamp Deluxe can be simply placed on the top of the terrarium or attached to aquarium/terrarium frame of a Repti Lamp Stand by using the clamp.
• The Clamp Lamp Deluxe has a porcelain socket and can be used for all bulbs with E27 socket including ceramic heat emitters with a maximum of 150W and 100W for the small model.
• The Brooder Lamp has a max wattage of 250W.

Instead of a wire mesh the Repti Clamp Lamp Deluxe has an aluminum reflector to enhance the light output of bulbs. T

• hanks to the reflector the Clamp Lamp Deluxe can be simply placed on the top of the terrarium or attached to aquarium/terrarium frame of a Repti Lamp Stand by using the clamp.
• The Clamp Lamp Deluxe has a porcelain socket and can be used for all bulbs with E27 socket including ceramic heat emitters with a maximum of 150W and 100W for the small model.
• The Brooder Lamp has a max wattage of 250W.

Instead of a wire mesh the Repti Clamp Lamp Deluxe has an aluminum reflector to enhance the light output of bulbs. T

• hanks to the reflector the Clamp Lamp Deluxe can be simply placed on the top of the terrarium or attached to aquarium/terrarium frame of a Repti Lamp Stand by using the clamp.
• The Clamp Lamp Deluxe has a porcelain socket and can be used for all bulbs with E27 socket including ceramic heat emitters with a maximum of 150W and 100W for the small model.
• The Brooder Lamp has a max wattage of 250W.

The Exo Terra Glow Light gives you the versatility of placing heat and/or light sources on your terrarium where needed. (...)

• Day and night fixture in one
• Provides long-lasting luminous, reflective glow
• Heat resistant porcelain socket

For re-fitting reflector clamp lamps or as spare part for the Thermo Socket plus Reflector lamps.

• These wire mesh protectors prevent animals from getting into contact with the bulb.
• They can be used for other lamps with similar diameter as well.

The Thermo Socket lampholder sets include a high quality porcelain socket, an On/Off power cord with Euro plug and
depending on the model - the necessary screws and fixtures for mounting it to the terrarium

• The Thermo Socket lampholder sets are a cost effective, easy and flexible way to equip your terrarium with the necessary light sources.
• Thermo Sockets are suitable for lamps up to 150W and are available in different variations. (...)

These high quality reflector lamps have an E27 porcelain lampholder, a high quality steel reflector, wire mesh protector and a silicon power lead.

• The steel reflector focusses the light and acts as sight protection, preventing from being blinded by the light.
• The wire mesh protector is placed on the bottom of the reflector and prevents that the animals can get in contact with the bulb.

The popular Thermo Socket plus Reflector is also available as MINI Version, fitting for all Halogen Sun Mini, Amphib Sun Mini and the Moon Lamp. (...)

Klemmlampe mit Aluminiumschirm und E27 Keramikfassung für Glühlampen und UV-Strahler.

Inklusiv 360° drehbarem Kugelgelenk zur zielgerichteten Beleuchtung des Terrariums. DIN EN Norm erfüllende Produktqualität.

Klemmlampe:

• stabiler Aluminium-Lampenschirm
• Eingebaute, hitzebeständige Keramikfassung (...)

The Reflector Sets consist of a high quality steel reflector and a wire mesh.

• They are made as addon to the Thermo Socket lampholder sets.
• Small for all Halogen Sun and Bright Sun UV lamps and large as extra long reflector for compact fluorescent and mercury vapour lamps.
• small (14 cm) and large (about 22 cm) Diameter both 14 cm

Spare part for technical equipment.

• Includes on/-off switch.
• According to DIN EN specification.

suitable for lamps up to 300 W

• including tubular brass screw thread piece
• 2 plain washers and 2 nuts for mounting to terrarium perforated plate
• certified DIN EN standard product quality.

Mounting with screw

• certified DIN EN standard product quality.
• Suitable for lamps up to 300 W.

Protects terrarium pets against burn injuries.

• Recommended for ceramic infrared heat radiators (such as Elstein) up to 150 watt and heat emitting bright radiators.
• Can be secured in the perforated sheet-metal of the terrarium cover using the brass thread and nut of the HOBBY ceramic holder connection set

Contrary to the simple Thermo Socket lampholder sets the Thermo Socket PRO are completely wired and ready for use.

• There are no electrical installations necessary.

Special mounting accessories and a connector allow the terrarium installation without the need to take the lampholder apart. (...)

The Reflector Sets consist of a high quality steel reflector and a wire mesh.

• They are made as addon to the Thermo Socket lampholder sets.
• The mini type is placed over the lampholder and fully covers it. A perequisite for this are lampholders with threaded pipe like the Thermo Socket models

The two larger reflectors are placed between socket and ring of two-part lampholders. This allows for an easy retrofitting.
Available in two sizes. Small for all Halogen Sun and Bright Sun UV lamps and large as extra long reflector for compact fluorescent and mercury vapour lamps.

The Deep Dome Lamp Fixture has been especially designed fpr energy saving lamps and the PowerSun which fit completely inside the reflector.

• The reflector is made of highly polished aluminium on the inside which increase the light output.
• On the outside the reflector is painted black. With porcelain lampholder for lamps up to 160W.

Tiefe der Schutzkörbe (jeweils am tiefsten Punkt):

• 14 cm - Variante: ca. 5 cm
• 20 cm - Variante: ca. 6,5 cm
• 25 cm - Variante: ca. 8 cm

These high quality reflector lamps have an E27 porcelain lampholder, a high quality steel reflector, wire mesh protector and a silicon power lead.

• The steel reflector focusses the light and acts as sight protection, preventing being blinded by the light.
• The wire mesh protector is placed on the bottom of the reflector and prevents that the animals can get in contact with the bulb. (...)

These lamp protector cages have a very fine wire mesh in order to prevent even very small animals from getting through to the lamp.

• They are suitable for all Lucky Reptile luminaires with E27 sockets.
• The large Thermo Protect Lamp Cage can even be put over the Thermo Socket plus Reflector luminaires. (...)

A ceramic lampholder and spun reflector ideal for use with our Self Ballasted Mercury Vapour and Halogen Basking Spot lamps.

particularly high quality and thermally resistant porcelain bulb holder

• suitable as a free-hanging fitting
• cable with switch
• also suitable as a permanent fixture or for clamp lamps
• assembly instructions included

Focuses light and heat radiation

• Stable grounded reflector with heat proof ceramic fixture E 27
• With aluminium protection grid against burns (...)

The sera reptil LED energy light is a special lamp with a clip holder for terrariums.

• Its 72 bright, extra long lived LEDs make it ideal for the energy saving lighting of terrariums and aquaterrariums.

The built-in moonlight function allows observing nocturnal animals in the dark. (...)

The Repti Lamp Stand was designed for use with the Zoo Med Clamp Lamps and is an easy and secure way to mount your terrarium lighting.

• Thanks to the large base the Lamp Stand has a secure footing.
• For further securing the Lamp Stand the terrarium can be placed on top of the base.
• The height is adjustable and can be adapted to the terrarium size. (...)

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.
To attach a power cord to (...)

Porcelain Socket, two pieces E 27 thread